Recensioni Clienti

Valutazione media

4.4/5
16 recensioni
Valutazione: 5/5 Tradurre

"Excellent product, instruction are easy to follow, did refer to the companies online videos. Good strong fixing achieved."

Recensito lunedì 11 giugno 2018

Valutazione: 4/5 Tradurre

"Good advice given"

Recensito giovedì 6 ottobre 2016

Valutazione: 5/5 Tradurre

"The resin fixing kit is well worth the money. So much better that the expanding steel bolts that I've used before."

Recensito giovedì 1 settembre 2016

Valutazione: 5/5 Tradurre

"Excellent"

Recensito lunedì 16 maggio 2016

Valutazione: 4/5 Tradurre

"very good, one point to note is that the cartridge gun was not man enough to break the seal on the resin cartridge and indeed broke itself first, luckily I had a heavy duty cartridge gun to hand, otherwise the resin fixing system worked a treat."

Recensito venerdì 16 ottobre 2015

Valutazione: 5/5 Tradurre

"Super"

Recensito lunedì 13 luglio 2015

Valutazione: 4/5 Tradurre

"la "pompe" pour injection est de qualité très moyenne."

Recensito lunedì 14 luglio 2014

Valutazione: 4/5 Tradurre

"When fitting a 4.5 meter awning with 3 brackets 1 tube of resin is not enough! Had to buy another tube from local DIY shop"

Recensito lunedì 30 giugno 2014

Valutazione: 4/5 Tradurre

"bien aussi"

Recensito martedì 17 giugno 2014

Valutazione: 4/5 Tradurre

"Did the job it was meant to do"

Recensito martedì 18 marzo 2014

Valutazione: 5/5 Tradurre

"simple to use . no problems"

Recensito giovedì 5 settembre 2013

Valutazione: 5/5 Tradurre

"Un petit peu juste pour 12 trous."

Recensito martedì 3 settembre 2013

Valutazione: 5/5 Tradurre

"Went off quite quickly/understandably in this hot weather !"

Recensito mercoledì 24 luglio 2013

Valutazione: 5/5 Tradurre

"satisfait"

Recensito mercoledì 19 giugno 2013

Valutazione: 2/5 Tradurre

"Another product kit which had no printed instructions supplied with it (are companies just getting lazy?). Instead these were printed on the resin tube but the (small) pictures didn't match what was needed (the resin bag within the tube had been modified). There was no hole cleaning brush supplied as per picture on the web page. (Primrose promised to send one but it never arrived.) A 16mm tungsten carbide tipped drill was supplied with the kit but this was only suitable for hollow wall applications. There was no 14mm drill supplied for my block wall fitting which was probably just as common an application."

Recensito lunedì 3 giugno 2013

Valutazione: 4/5 Tradurre

"Resin kit worked very well but came without any instructions. The masonry drill was too short for the mesh plugs and had to be gripped in the drill by the last 2mm to enable a sufficient depth hole to be achieved. It was rated at the same length as the plug on the packaging. The tube of resin was insufficient for four holes and I had to use some other to top up. The bricks had the modern set of 3 round cavities in each brick and the resin just disappeared inside. David Wardell"

Recensito mercoledì 11 agosto 2010